CLUTCH SLAVE CYLINDER REPAIR KIT 3500S

Rover Part No. 8G8600

UNIVERSAL JOINT PROP SHAFT 2000 2200 3500

ROVER PART NUMBER GUJ108

COMPLETE WITH GREASE NIPPLE AND CLIPS

FOR DRIVE SHAFT UNIVERSAL JOINT SEE PART NUMBER GUJ112

GEARBOX REMOTE SHAFT  REFURBISH SERVICE MGBD0422

AT PRESENT THIS SERVICE IS ONLY AVAILABLE ON YOUR OWN REMOTE, WE DO NOT HAVE A SERVICE EXCHANGE UNIT.

WHAT WE DO, IS FIT TWO BLOCKS TO THE REMOTE AND THEN MACHINE THEM TO ACCEPT THE ORIGINAL REMOTE SHAFT AND THEN YOU WILL HAVE A VERY SMOOTH GEARCHANGE. SEE ILLUSTRATION

GIVE US A CALL ON +44 (0)1902 689975 OR DROP US AN EMAIL FOR MORE DETAILS.

YOU WILL NEED TO SEND US YOUR OWN LATER TYPE GEARBOX REMOTE CARRIAGE AND SHAFT FOR REFURBING 

PLEASE ALLOW 7 WORKING DAYS FROM THE TIME YOUR GEARBOX REMOTE ARRIVES WITH US UNTIL DESPATCH.

IF YOU HAVE A SPARE 'WORN OUT' REMOTE CARRIAGE & SHAFT ASSEMBLY  THAT YOU DON'T WANT, WE ARE WILLING TO PURCHASE IT FOR £20 AND PAY P&P SO THAT WE CAN BUILD UP A STOCK OF SERVICE EXCHANGE ITEMS.  THANK YOU

CLUTCH SLAVE CYLINDER Complete with Bleedscrew for a Rover P6 2000 & 2200 (1963 - 1977)

Rover part number 533521

WE HAVE CHECKED EARLY MODELS AND THIS SLAVE CYLINDER WILL FIT BOTH THE EARLY 2000 MODEL WITH THE STUDS ON THE BELL HOUSING AND THE LATER 2000 AND 2200 WHICH USE BOLTS TO SECURE.

Original slave cylinders on both early and later 2000 and early 2200 would have a 7/8" bore while the later 2200 had a 1" bore cylinder, however this cylinder will replace all of those.

Seal kits are available for the 7/8" cylinder on part number 538455 and 1" seal kit on RTC0700 however neither will work for long if the cylinder bore is corroded so please check carefully. 

SUMP PLUG COPPER WASHER 3500

ROVER PART NUMBER 213961

ALSO USED ON MANUAL GEARBOX AS WASHER FOR FILLER AND DRAIN PLUGS (2000, 2200 & 3500S)

GEARBOX GASKET KIT 2000 2200

OUR PART NUMBER MGBD0427

KIT CONTAINS 

1 X CLUTCH RELEASE HOUSING TO BELL HOUSING GASKET, 561418

1 X BELL HOUSING TO GEARBOX GASKET  FRC1068

1 X GEARBOX TO SPEEDO DRIVE HOUSING GASKET 594274

1 X DETENT GASKET  514051

1 X CLUTCH RELEASE CROSS SHAFT GASKET 503870

Please note, all these gaskets are available separately.

GASKET BELL HOUSING TO RELEASE BEARING HOUSING 2000 2200 3500

ROVER PART NUMBER 561418, 512604 & FRC1217

SERVICE NEWS LETTER JAN 1967 SAYS, EARLY CARS HAD A THINNER GASKET [0.006 IN] THAN LATER CARS [0.015 INCH], HOWEVER THESE GASKETS ARE INTERCHANGEABLE SO PLEASE DO NOT WORRY IF OUR SUPPLIED GASKET IS THICKER THAN THE ONE YOU HAVE REMOVED.

THICKER GASKET FITTED AS STANDARD FROM GEARBOX  SERIAL NUMBER 40158712F

ALSO SOLD AS PART OF 2000/2200 GEARBOX KIT MGBD0427 AND 3500S GEARBOX KIT MGBD0802

GASKET GEARBOX TO SPEEDO DRIVE HOUSING 2000 2200

ROVER PART NUMBER 594274

ALSO SOLD AS PART OF GEARBOX GASKET KIT MGBDO427

GASKET GEARBOX TO BELL HOUSING 2000 2200

ROVER PART NUMBER FRC1068

ALSO SOLD AS PART OF 2000/2200 GEARBOX KIT MGBD0427